Single Spring Mechanical Seals Components include: Seat, O-ring, Primary Face, Bellow, Seal Head, Drive Band, Spring, Spring Holder.
Installation Guide of Single Spring Mechanical Seals
1. When install the Single Spring Mechanical Seals, please work in a clean area with good lighthning.
2. Touch Single Spring Mechanical Seals faces as little as possible. If touched, use a soft tissue with acetone to clean the faces.
3. All pump parts directly in contact with the Single Spring Mechanical Seals should be verified to be exempt of any defects.
4. Pay attention to the pump shaft. Often, mechanical seals or o-rings can be damaged on the shaft end or sharp key ways.
5. Verify the shaft surface at the mechanical seal location to detect any surface problems.
Hanway Industries Co., Ltd. offer Single Spring Mechanical Seals at very competitive pricing. Welcome to do business with us. Email: sales@allchinaseal.com
